Motech, programmable power supplies

PPS SERIES SPECIFICATIONS

PPS-1000 Series
PPS-1020 Series
PPS-1200 Series
PPS-2000 Series
Programming Accuracy
main page PPS Series

PPS-1000 Series

(70W single output with external programming capability)

MODEL PPS-	Output Ratings Voltage/Current	Programming Resolution(LSB) Voltage/Current
1001	0 to 8V/0 to10A	2mV/4mA
1002	0 to 18V/0 to 4A	5mV/2mA
1003	0 to 30V/0 to 2.5A	10mV/1mA
1001	0 to 35V/0 to 2A	10mV/0.6mA
1005	0 to 60V/0 to 1A	20mV/0.4mA
1006	0 to 128V/0 to 0.5A	40mV/0.25mA
1007	0 to 250V/0 to 0.2A	80mV/0.1mA

PPS-1020 Series

top

(100W single output with dual range operation)

MODEL PPS-	Output Ratings Voltage/Current	rogramming Resolution (LSB) Voltage/Current
1021	0 to 17.5V or 0 to 35V/ 0 to 6A or 0 to 3A	10mV 2mA(high)/1mA(low)
1022	0 to 30V or 0 to 60V/ 0 to 3A or 0 to 1.5A	20mV 1mA(high)/0.5mA(low)

PPS-1200 Series

(70W per channel/dual outputs)

MODEL PPS-	Output Ratings Voltage/Current	Programming Resolution(LSB) Voltage/Current
1201	dual 0 to 8V/0 to 6A	2mV/2mA
1202	dual 0 to 18V/0 to 4A	5mV/1.5mA
1203	dual 0 to 35V/0 to 2A	10mV/0.6mA
1204	dual 0 to 30V/0 to 3A	10mV/1mA
1205	dual 0 to 60V/0 to 1A	20mV/0.4mA
1206	dual 0 to 128V/ 0 to 0.5A	40mV/0.25mA

PPS-2000 Series

top

(180W single output with external programming capability)

MODEL PPS-	Output Ratings Voltage/Current	Programming Resolution(LSB) Voltage/Current
2013	0 to 30V/0 to 6A	10mV/2mA
2014	0 to 35V/0 to 5A	10mV/2mA
2015	0 to 8V/0 to 20A	2mV/7mA
2016	0 to 18V/ 0 to 10A	5mV/3mA
2017	0 to 60V/ 0 to 3A	20mV/1mA
2018(A)	0 to 128V/0 to 1.5A(2A)	40mV/0.5mA
2019(A)	0 to 250V/ 0 to 0.8A(1A)	80mV/0.25mA

Programming Accurancy

Voltage
Current

0.05% + 2LSB
0.15% + 5LSB

Ripple and Noise

Rmis

1mVrms

(PPS 1006, 1007, 1206, 2018(A), 2019(A), 3mVrms)

Peak-to-peak

10mVp-p

Reaback Accuracy

Voltage
Current

0.1% + 2LSB
0.2% + 5LSB

Load Regulation

Voltage
Current

0.001% + 1mV
1mA

Transient Recovery

50 µs typical

Programming Up/Down Speed

15ms/20ms typical

Operating Temperature

0 to 40°C

Dimensions

8.4" x 5.2" x 15.7"

Weight

16 to 20lbs

External Programming: (PPS-1000 and PPS-2000 Series)
Both the voltage and current can be programmed by an external analog voltage. The outputs are linearly proportional to an external input voltage from 0 to 10 volts with correspondence to the voltage and current full-scale outputs.
To program both voltage and current outpur simultaneously in the external programming mode, two isolated voltage sources are required.

Tracking Functions: (PPS-1200 Series)
When the tracking mode is enabled, the voltage and current output of channel two is identical to channel one, and also controlled by channel one.

Dual Range Operation: (PPS-1020 Series)
The PPS-1020 series have two (high/low) operating ranges: high range stands for high current / low voltage output, and low range stands for low current / high voltage output.

Remote Sensing:
Up to 0.5 volt can be dropped in each load wire; add 0.5 to 1mV to the voltage load regulation specifications for 0.5 volts drop in the positive load wire.

GPIB Interface Capability: SH1, AH1, T6, TEO, L4, LEO, RL1, SRO, PPO, DC1, DTO, CO, E1

Warranty period: 2 years

Optional Accessory: GPIB Interface Card

back to main page PPS Series

top

Motech Nederland
Pleimuiden 12 E - 1046 AG Amsterdam Tel: 00-31-(0)20-6146033 Fax: 00-31-(0)20-6144707
Contact us by email