 |
|
|
|
| |
PROGRAMMABLE POWER SUPPLY SERIES
PPS Series |
|
| |
One Box Solution Architecture
Remote Sensing
Programmable Protection Settings
Electronic Calibration
Standard GPIB Interface
Reliability and Performance
Specifications
Download PPS Software Tool |
Features |
|
- Standard GPIB Interface
- One-Box Solution Architecture
- Electronic Calibration via Front Panel or GPIB
- Programmable Overvoltage and Overcurrent Protection
- Low Ripple and Noise Output
- Voltage Controlled External Programming Capabilities
- Output Enable/Disable
- Remote Sensing Function
- Programmable Up/Down Fine Tuning
- Power-Off Memory
|
|
| |
One Box Solution Architecture |
|
| |
To optimize bench space and interconnections between all components that make up a programmable power supply, MOTECH offers One Box Solution. One Box Solution combines the current shunt, DVM, voltage and current programmers all in one simple unit. This makes the power supply programming and monitoring system reliable and easy to use. |
|
| |
Remote Sensing |
|
|
| |
The remote sense function automatically compensates unavoidable voltage drops caused by the loas leads. The voltage is sensed at load rather than at the output terminals of the supply. Thus, proper voltage is provided to the load at all times. |
|
| |
Programmable Protection Settings |
|
| |
Protecting your power supply and your load is a great concern to MOTECH. The PPS series provide two programmable protection settings, overvoltage (OV) and overcurrent (OCP). Whenever either of the two settings are tripped, the outputs are instantaneously disabled. Therefore, protecting your supply and load from the possibility of extensive damage. |
|
| |
Electronic Calibration |
|
| |
In order to provide years of reliable and troublefree service, each power supply is able to be software calibrated. This method allows the unit to be calibrated without having to remober it from a system or even the cover for that matter. This method is a simple operation that can be done in either local or remote mode (GPIB). The equipment necessary for the calibration is a 5 1/2 digit DMM and a high precision shunt resistor. |
|
| |
Standard GPIB Interface |
|
| |
Each power supply offers a GPIB interface as a standard accessory, unlike other manufacturers who charge hundreds of dollars more. The GPIB (General Purpose Interface Bus) function enables linking a computer, peripherals and instruments into a single automated system. The user writes software programs which allow the system to talk, listen and control operations. Thus, providing a very effective and powerful ATE system. All GPIB interface functions for the power supplies are compatible with IEEE-488 standard. |
|
| |
Reliability and Performance |
|
|
| |
These industry grade linear power supplies have been proven to provide superior operational characteristics.
- Load/line regulation of 1mV/1mA rms
- Low PARD
- Short transient recovery time
- Forced air ventilation system to decrease component temperature susceptibility
- Optocouplers to isolate digital control circuits
- Extensive burn-in testing to detect infant mortality in units
All these points are furthermore backed by a two-year warrantly on parts and labor to ensure your confidence and satisfaction wiht our power supplies. |
|
| |
|
|
