Motech Nederland
to home to company profile to products to dealers to software update
 
  Aeasy ADSL Tester
MT300
 
 

Features
Specifications
General specifications
Download PDF Operatin Manual

MT300

Characteristics:  

MT300 Aeasy is a handheld tester for POTS and ADSL lines. It is a fully integrated ATU-R modem emulator for ADSL line installation, qualification and maintenance. MT300 also represents a digital multimeter for troubleshooting the basic cooper loop. Apparently, daily based telecommunication technicians focus on these two test functions as the major purpose of troubleshooting the ADSL line. It is an easy operation tester with only One button press to provide the desired result instantly. In addition, it's compact design and dimension of 185 x102 x 50 mm approx. makes holding and operation extremely very easy,simple and comfortable. Thus, depicts MT300 as a great modern tester.

 
  Features
top
 
 
  • Small size, compact and easy operation
  • Fully modem emulation for ADSL application
  • Indicates upstream/downstream rate, noise margin, SNR, attenuation and output power
  • LED indicator for modem connection status
  • Digital multimeter for basic line troubleshooting
  • Insulation resistance measurement
  • Load coil counter detection
  • IP ping test with PPPoE and PPPoA protocols
  • Build-in Ethernet port for through mode operation
 
 
mt300
 
 

The MT300 Aeasy is the ultimate solution for prequalification of the ADSL circuits. The connection of MT300 at the end of the line, makes the modem to connect with the DSLAM and to measure the bit-rate, noise margin, SNR, attenuation and output power. MT300 is easy to operate by multifunctional key pads and backlit LCD. A glance at the quick response of bi-color LED, the technician can easily find out the line condition as well as the error or alarm status.

 
  Specifications
top
 
  Line Measurement
1. Loop DCV Measurement
 
  Range :
Resolution :
Accuracy :
Connection :
0 to 300V
1V
±1% of reading ± 2V
T-R, T-S, R-S
 
  2. Loop ACV Measurement
 
  Range :
Resolution :
Accuracy :
Connection :
0 to 250Vrms
1V
± 3% of reading ± 3V
T-R, T-S, R-S
 
  3. Loop DCA Measurement    
 

Range :
Resolution
Accuracy :
Connection :

0 to 200mA
1mA
± 2% of reading ± 1mA
T-R, T-S, R-S
 
  4. Loop Resistance Measurement  
 
Range
Resolution
Accurancy
0 to 2000
1 W
± 2 % of reading ± 3W
2000 to 20K
10 W
± 2 % of reading ± 20 W
20K to 200K
100 W
± 2 % of reading ± 100 W
200K to 2M
1K W
± 2 % of reading ± 1K W
2M to 20M
10K W
± 2 % of reading ± 10K W
 
  Connection :
Display :
T-R, T-S, R-S
Distance in meter/feet, Resistance
 
  5. Insulation Resistance Measurement  
  Range :
Resolution :
Accuracy :
Testing Voltage :
Connection :
100M W
0.1M W
±10% of reading ± 0.2M W
100V
T-R, T-S, R-S
 
  6. Loop Capacitance Measurement  
 
Range
Resolution
Accurancy
0 to 4nF
1pF
± 2 % of reading ± 2 pF
4nF to 40nF
10pF
± 2 % of reading ± 20 pF
40nF to 400nF
100pF
± 2 % of reading ± 200 pF
400nF to 4  F
1nF
± 2 % of reading ±2nF
 
  Connection :
Display :
T-R, T-S, R-S
Distance in meter/feet, Capacitance
 
  7. Load Coil Detection  
  Load Coil Count : 5 Max.  
  8. Longitudinal Balance (Option)
 
  Frequency :
Intrinsic Signal
Balance Ratio :
Impedance :
276 KHz

50 dB
100 W
 
  9. Crosstalk Measurement (Option)  
  Bandwidth :
Auto Scan :
Accuracy :

Impedance :

4 KHz
Find top 5 interferences
± 1 dB @ ± equal or bigger then 60 dB
± 2 dB @ <60 dB
100 W

 
  ADSL Modem Emulator
top
 
 

1. Chipset :
2. Emulation :
3. Line Coding :
4. Standard Compliant :

ADI
ATU-R modem, ATU-R modemthrough mode
Discrete Multi-Tone
ANSI T1.413 issue 2, ITU-T G.992.1 (G.DMT), G.992.2 (G.Lite)
 
  5. Up/Down Stream Measurement (Interleave/Fast)  
      Connection Bit Rates :
    Max Bit Rates :
    Noise Margin :
    Attenuation :
    Output Power :

Upstream 1.1Mbps, Downstream 10Mbps
Upstream 960Kbps, Downstream 10Mbps
0 to 31.5 dB
0 to 63.5 dB
0 to 13 dBm

 
  6. Link Measurement : FEC, CRC, HEC (error), LOS, LOC, LOF, LOP,LCD  
 

7. SNR/Bit Per tone in Tabular display & may transfer to PC for graphic display (option)
8.   IP measurement
8.1 Protocol Supported
- IP over Ethernet : RFC 1483/2684 LLC bridging / routing mode with static & DHCP IP assigned
- IP over PPPoE : RFC 2516 PPPoE (Static&Dynamic) with PAP/CHAP PPP session authentication supported
- IP over PPTP over Ethernet : RFC 2364 PPPoA
8.2 Test Results
- Statistics on Ping Message : No. of sent / received /missing /unreached messages and round trip delay for current / average/ Max/Min
8.3 Setup parameter
- Local/Destination/Gateway IP address
- Frame length, times and Rate for Ping message generation
- Encapsulation/User and password for PPP session authentication
9. LAN Port : 10/100M Auto Detection for Through Mode

 
 

General specifications

top
 
  Display :
16 x 4 characters dot matrix LCD with EL backlit
and LED indication of modem sync, link measurement, LAN
connection status and test status
 
  Connector : RJ11 --- WAN port and POTS port
RJ45 --- LAN port
RJ11 --- RS-232C port
 
  Battery : AA-size Ni-Mh rechargeable battery  
  Battery Life : 3 hours typical  
  AC Operation :
115/230V  50/60Hz (via external adapter)
 
  Temperature : 0° to 40° C (Operating)
-20° to 70° C (Storage)
 
  Relative Humidity : Up to 85%  
  Dimension : 185 x 102 x 50 mm approx  
  Weight : 600g  
  Accessories : 1. RJ 45 cable  1PC
2. Power Adapter  1PC
3. Rechargeable battery  4PCS
4. Carry case  1PC
5. Manual  1PC
 
  Order information
top
 
  MT300 ADSL Version (ANALOG)
MT300 ADSL Version (ISDN)
 

Motech Nederland
Pleimuiden 12 E - 1046 AG Amsterdam  Tel: 00-31-(0)20-6146033 Fax: 00-31-(0)20-6144707
Contact us by email