 |
|
|
|
| |
MIC 2090W
The Ultime Solution for DSL Installation and Maintenance |
|
| |
Specifications
General Specifications
Accessories
|
Features |
|
- Measure Power, Current, Voltage, Frequency and Resistance
- Read True Power (VAcosq), Apparent Power (VA),
Reactive Power (VAsinq), and Power Factor (cosq)
Read value of AC,DC, and AC+DC in the signal
- True RMS or Avg. Scale to RMS Measurement
- Surge Mode for Inrush Current
- Data Hold, Max, Min. and Crest Factor Reading
- Autornage and Manual Operation Selectable
- 0.8" Digital Height Display, 3500 Counts with Annunciators
|
|
| |
Specifications
|
|
|
| |
DC Current
35A |
1%+15 |
0.06A |
1000A |
350A |
1%+5 |
0.2A |
1000A |
1A |
AC Current
47/63Hz |
up to 400Hz |
35A |
1%+15 |
2%+10 |
0.03A |
1000A |
350A |
1%+5 |
0.1A |
1000A |
1A |
Active Power (V x A x COSq)
3.5KW |
2%+5 |
2W |
Corresponds to V & A measurements |
35KW |
20W |
350KW |
200W |
|
|
| |
The accuracy applies from 5% - 100% of the range. |
|
| |
Apparent Power (VxA)
3.5KVA |
2%+5 |
2VA |
Corresponds to V & A measurements |
35KVA |
20VA |
350KVA |
200VA |
|
|
| |
The accuracy applies from 5% - 100% of the range.
|
|
| |
Reactive Power (V x A x Sinq)
3.5KVar |
2%+5 |
2Var |
Corresponds to V & A measurements |
35KVar |
20VVar |
350KVar |
200Var |
|
|
| |
The accuracy applies from 5% - 100% of the range. |
|
| |
Reactive Power (V x A x Cosq)
3.5KW |
3%+10 |
0.001 |
Corresponds to V & A measurements |
35KW(<400V) |
350KW |
Crest Factor (Continuous Waveform 45Hz~65Hz,<1000A peak)
1~6 |
3%+2 |
0.001 |
Corresponds to V&A measurements |
AC Voltage (45Hz~400Hz)
350V |
1%+5 |
0.1V |
5MW(10pf Shunt) |
DC 1000V
AC 750Vrms |
600V |
1V |
|
|
| |
The accuracy applies from 5% - 100% of the range.
|
|
| |
DC Voltage
350V |
1%+5 |
0.2V |
5MW |
DC 1000V
AC 750Vrms |
600V |
1V |
Surge Mode
ACA |
Capture and retain current surge long enough for reading |
3%+5 |
20ms |
|
|
| |
Note: Aquisition time is the minimum duration of
surge for rated accuracy. Accuracy imporves for longer peak duration. The accuracy
applies from 5%-100% of the range. |
|
| |
Frequency
10Hz-1KHz |
0.5% |
1Hz |
AC/DC 400V |
Resistance
0-3.5KW |
±1% |
1W |
AC/DC 400V |
Audible Continuity Check
W with . ))) |
The beeper is triggered if resistance < 30W |
±1W |
AC/DC 400V |
|
|
| |
The specifications given assume an operation temperature of 18ºC to 28ºC, humidity up to 80%, and a 1 year calibration cycle. *Accuracy is + (% of reading + number of digits) |
|
| |
General Specifications |
|
| |
Conductor Size:
Maximum Common Mode Voltage:
Power Source:
Display:
Sample Time:
Power Consumptions:
Operating Temperature:
Storage Temperature:
Dimensions:
Weight: |
55ø clamp jaws
500 VDC/peak AC
4 x AAA batteries
4 digits 0.8" high LCD with the annunciators of all functions
0.3 second
240 mw
0 ~ 40ºC
-20 ~ 70ºC
85 x 270 x 43 mm (WxLxH)
700g |
|
| |
Accessories: |
|
|
| |
Test Probes:
Alligator Clips:
Manual:
Carrying Case: |
1 pair
1 pair
1 piece
1 piece |
|
| |
|
|
