Motech Nederland
to home to company profile to products to dealers to software update
 
  MOBILE COMMUNICATIONS DC SOURCE
Dual Channel DC Source and Current Sink Capability
  Mobile Communications DC source Characteristics  
  • Standard GPIB Interface
  • Electronic Calibration via Front Panel or GPIB
  • Programmable Overvoltage and Overcurrent Protection
  • Low Ripple and Noise Output
  • Output Enable / Disable
  • Remote Sensing Function
  • Programmable Up/Down Fine Tuning
  • Power-Off Memory

 
  Specifications  
 
AC Input One internal switch permits operation of 115 or 230(240) Vac line Voltage
Input Current
115 VAC / 230VAC
1.35A /0.7A 2.7A / 1.35A
Fuse Rating
115VAC / 230VAC
AC input is protected by a rear panel mounted fuse
2.5A /1.25A
4A / 2A
Power 115 Vac or 230 Vac ± 10%; 50 to 60Hz
Maximum VA / Power 160VA /125W 315VA/240W
Peak Inrush Current 20A 30A
DC Output Programming Range
Voltage/Current
0~8V/0~3A 0~18V(20V)/ 0~4A
Sink Current 0 to -3A 0 to -4A
DC Output Programming Range
Voltage/Current

0 to 8V /-3A TO 3A
High Range  - 3A to 3A
Low Range   - 3mA to 3mA
0 to 18V(20V)/
-4A to 4A
programming Resolution (LSB)
Voltage/Current
2mA / 1mA 10mV / 2mA
programming Accuracy
Voltage/Current
0.05% + 2LSB / 0.15% + 5LSB
Sink Current Tracking 0.3% + 10 LSB
Load Effect 
Voltage/Current
0.001% + 1mV / 1mA
Remote sense operation is possible with up to 0.5V drop for positive and negative output load leads.
Source Effect
Voltage/Current
1mV / 1mV
PARD (Periodic and Random Deviation and Noise)
RMS/PK-PK(20Hz-20MHz) with output ungrounded
Voltage/Current
0.5mVrms / 10m Vp-p / 1mArms 1mVrms/10mVp-p/1mArms
Temperature Coefficient
Voltage/Current
100ppm/ºC / 200ppm/ºC
Drift (Stability)
Voltage/Current
0.01% + 1mV / 0.1% + 5mA
Load Transient Response
Recover Time
< 50us
Programming UP/DOWN Speed
Tup/Tdn
LSB

1ms/2ms
5ms/10ms
READBACK Resolution
Voltage/Current

2mV/1mA
High Range 1mA
Low Range -1£gA
10mV/2mV
READBACK Accuracy
Voltage/Current
0.1% + 2LSB / 0.2% + 5LSB
READBACK Temperature Coefficient
Voltage/Current
100ppm + 4mV /200ppm + 4mA
Output Isolation 240Vdc
Neither output terminal may be more than 240Vdc fromchassis ground.
Temperature Rating/Humidity Range Operating 0ºC to 40ºC/30 to 80% RH Storage  -20ºC to 70ºC / 20 to 80% RH
GPIB Interface Capability SH, AH1, T6, TE0, L4, LE0, SR0, PP0, DC1, DT0, C0, E1
Weight 7.30 kgs ( 16lbs ) 9kgs ( 20lbs )
Dimensions 8.4" X 5.2" X 15.7" for all models
 
 
top
 

Muco Technologies BV
Pleimuiden 12 E - 1046 AG Amsterdam  Tel: 00-31-(0)20-6146033 Fax: 00-31-(0)20-6144707
Contact us by email